Self-Loading Cutter Wagon RS 85

The RS 85 is the smallest of the two-axle machines fitted with dosing rollers, suitable for 85 head of cattle.

Technical data download

The RS 85 is the smallest of the machines fitted with dosing rollers that allow for the homogeneous distribution of the product. Unloading can be carried out in two different ways: sideways by means of a rubber cross belt or at the back by means of a tailgate. The machine is fitted with an independent segmented boogie axle system.

Technical Features



  • Robust frame and drawbar in high strength steel (S355) with special attention paid to thickness, tubular section, and welds.
  • FEM simulations to verify the structural tightness of each single component of the machine.
  • A segmented double bogie axle system is standard. The independent oscillation on both sides minimizes the stresses on the frame.
  • Mower on independent frame that allows free oscillation
  • Electric controls as standard


  • Two-drum cutter bar with helical gear transmission that transmits more power, reducing consumption and noise.
  • High resistance steel discs. Hydraulic lightening system (on request), which drastically reduces mechanical stress on the mower / elevator unit, increases the life of the machine and provides a dynamic response to the roughness of the ground.
  • Perfectly shaped collector plate which, thanks to the turbulence of the drums, conveys the forage directly into the loading elevator. The product never touches the ground and remains clean.



  • Loading elevator with two chains equipped with forks that transport the product without damaging it.
  • The elevator is hydraulically driven and can mount a certain number of knives to cut the forage and make unloading easier.



  • Hydraulically driven chain conveyor sliding on the loading platform.
  • Two unloading solutions: sidewards via the left/right two-sided cross belt (on request it comes in its simultaneous L/R version) or via the hydraulic tailgate.

Data Sheet

Loading Capacity [m³]26
Vol. DIN 11741 [m³]21
Cutter Bed Width [m]1.85/2.10
Total Length [m]8.25
Total Width [m]2.20
Total Height [m] 2.95
Body Length [m]4.70
Body Length with Tailgate [m] 5.30
Body Width [m]2.00
Body Height [m]1.65
Body Height with Extensions [m]1.90
Axels [Nr]2
Standard TiresFino a 19.0/45-17
Net Weight [Kg]4200
Minimum Power85 cv
Recommended Power150 cv

Technical Features

Independent Segmented Boogie Axle System

Cutter Bar up to 2.10 m

High Performance Hydraulic Circuits

Loading Elevator

Hydraulic tailgate

sidewards via the left/right two-sided cross belt (on request it comes in its simultaneous L/R version)

Standard Streaight Drawbar

Z-Shaped Drawabar (Lower Drawbar under the PTO)

Closed Sides

Open sides

Electric Controls and Electric Control Unit