Self-Loading Cutter Wagon RS 65 SB

The Riberi RS 65 SB self-loading cutter wagon is the most compact machine of the two- axle range. It is manoeuvrable and with a large loading capacity.

Technical data download

The Self-Loading Cutter Wagon RS 65 SB is hydraulically driven and equipped with a retractable cross conveyor for the side unloading. This conveyor can be controlled both from the driver’s seat and from the rear of the machine.

Technical Features


  • Robust frame and drawbar in high strength steel (S355) with special attention paid to thickness, tubular section, and welds.
  • FEM simulations to verify the structural tightness of each single component of the machine.
  • A segmented double bogie axle system is standard.  The independent oscillation on both sides minimizes the stresses on the frame.
  • Mower on independent frame that allows free oscillation.


  • Two-drum cutter bar with helical gear transmission that transmits more power, reducing consumption and noise.
  • High resistance steel discs.
  • Hydraulic lightening system (on request), which drastically reduces mechanical stress on the mower / elevator unit, increases the life of the machine and provides a dynamic response to the roughness of the ground.
  • Perfectly shaped collector plate which, thanks to the turbulence of the drums, conveys the forage directly into the loading elevator. The product never touches the ground and remains clean.



  • Loading elevator with two chains equipped with forks that transport the product without damaging it.
  • The elevator is hydraulically driven. It can mount a certain number of knives to cut the forage and make unloading easier.



  • Hydraulically driven chain conveyor sliding under the loading platform.
  • Two unloading solutions: sidewards via retractable cross conveyor or by using the simple hydraulic tailgate.

Data Sheet

Loading Capacity [m³]24
Vol. DIN 11741 [m³]19
Cutter Bed Width [m]1.85 - 2.10
Total Length [m]7.50
Total Width [m]2.10
Total Height [m]2.95
Body Length [m]4.10
Body Length with Tailgate [m]4.70
Body Width [m]2.00
Body Height [m]1.65
Body Height with Extensions [m]1.90
Axels [Nr]2
Standard Tires11.5/80-15,3 oppure 15.0/55-17
Net Weight [Kg]2300
Minimum power65 CV
Recommended power80/90 cv

Technical Features

Detail of unloading conveyor

Independent Segmented Boogie Axle System

Cutter Bar up to 2.10 m

High Performance Hydraulic Circuits

Loading Elevator

Unloading Tailgate

Standard Streaight Drawbar

Closed Sides

Open sides

Electric Controls and Electric Control Unit